My FPV saga

I realized that I have photos almost of all my fpv stuff I had and thought that it could be interesting to put them on a timeline. So here it goes! What I currenlty have: Radios Radiomaster TX16S with Crossfire and Ghost modules – my main radio Jumper T-Lite – secondary/trainee radio Goggles Fatshark HD3 […]

Slim Lora wing

My new wing project. I’ve got foam parts for two sub250g spec racing wings with 59cm wingspan. Got curious to make one as a long-range wing with submerged electronics and integrated 2S Li-Ion cells. Grabbed electronics nearby and weighted that roughly. It’s going to be light wing. As a racing wing, it has symmetric airfoil […]

OpenTX safe arm switch for naked wings

When we fly naked planes or wings, there is no smart flight controller on board, which has some safety functions. All main safety routines depend on your habit. Many of us set an Arm switch function in the radio. A typical solution for Arm switch is just overriding throttle channel by -100 value when the […]

AR Nano racing wing

AR Wing Nano

I love AR Mini wing by Sonic Model. It’s a racing wing with a wingspan of 600mm. With 4S 850mAh battery it weights around 300g. But I was wondering, is it possible to make a smaller and lighter version of it. There was the same project somewhere in the internet las year. But I didn’t […]

DiA Tiny Whing V2 FT 2S 40

DiA Tiny Whing V2 FT 2S 40

My new version of Tiny Whing designed to be built on FliteTest 5mm water resistant foam board. Much easier and faster to build, no carbon fibre spars needed. I also made it a 2S version. So here will be a part list for the 2S build. If you want to build 1S just use 1S ESC and 19000kv […]

DiA Tiny Whing 40 1S wing

DiA Tiny Whing 40 1S wing

Tiny Whing 1S micro wing inspired by AD/HD Delta and FPVWRA racing wings. Wing designed to run on tiny whoop’s motor and 1S battery.

DiA Lens wiper

DiA Lens wiper

There was a joke about rain wiper for fpv camera. I’ve heard that and my brains started ticking. There is no restriction to fly our quads, wings and plane in the rain. This restriction is just in someone’s head. Just use a proper conformal coating and Send It. In Finland, we fly around the year, […]

Flex Owl v3 cinewhoop

Flex Owl v3 cinewhoop

New version of my Flex Owl 3D printed cinewhoop frame for filming, inspection and other safety purpose.

FPV (cheapo) monitor

FPV (cheapo) monitor

I needed some small, simple handheld FPV monitor for the cheap price. Found on Banggood RX5808 receiver with 5″ display, but all the cases I found are ugly and not so handy. So got an inspiration to design my own version. And here it is! Feel free to download and print it yourself 🙂 Total […]

DiA Compact tilt camera system

This is an experiment in making the most compact tilt camera system for FPV quads and planes. The main idea is to make the whole system in the size of the full-size fpv camera. So the whole system could be placed into standard mounts without a hassle. You’ll need a longer screw for link mount […]